مجالات الاستخدام

• Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
• The panels are on wood pallets covered in plastic with rings and corner brackets added.
• During transport the panels must be covered in canvas.
• When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
• The panels must be stored in a closed area.
• Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
• If the panel packages are to be stacked caution should be taken to align them.
• If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
• After panels are taken from the package to be used the package should be covered over again with the plastic.
• The storage area must be closed.
• When stacking pallets the pallet feet should be lined up one on top of the other.
• Do not take the plastic cover off until use.
• Do not take off the steel strips until use.
• The materials should be placed on the smoothest ground possible.
• When storing, pallets should be placed on top of each other neatly and the total height of pallets should not be over 3 meters.
• When loading, only two pallets at a time should be loaded.
• When loading make sure that the pallets are placed on the truck in a balanced way.
• Pallets ready for transport