Products

Cement-Bonded Particle Board

Fiber Cement Board

Interior and Exterior Paints

Thermal Insulating Plaster





ENFRDERUAR

Select Language


Turkish English French German Russian Arabic
Homepage        Products        tepePan®

tepePan®

Description
Properties
Areas of Usage
Color and Design
Packaging / Storage / Handling

tepePan®


Tepepan ® for permanent and aesthetically detailed solutions and long-lasting, healthy, safe and environmentally friendly structures. For a livable environment and safe structures.

Fire Class A  Fast and Easy Application


Advantages of Use


  • Environment friendly.
  • Does not contain any harmful substances to health.
  • Asbestos free.
  • A1 Fire Class.
  • Does not release toxic gas during the fire.
  • Resistant to moisture and water.
  • Resistant to the effects of sunlight.
  • Resistant to seasonal changes.
  • Easy assembly and modification procedures.
  • It is odorless and does not release toxic gas.
  • Extends and protects the life of insulation material when
  • used in heat and sound insulation systems.
  • Resistant to impacts.
  • Resistant to biological and chemical wastes.
  • Easy to carry, light weight.
  • Insect-proof, non-putrescible, no molding.
  • Easy to cut.
  • Offers different solutions in all areas of building projects.
  • A finishing material
  • Can be painted repeatedly.
  • Cement based.
  • Can be used with insulating material of any desired thickness.
  • Can be used in fine details with smooth cutting surfaces.
  • Very high impact resistance compared to gypsum based boards.
  • Protects the supporting carrier system.
  • Creates facades and surfaces compatible with fire regulations.


Area of Application


  • Construction of interior and exterior walls of all kinds of buildings
  • In ventilated facade systems
  • In insulated - plaster cladding systems
  • All surfaces in prefabricated and light steel structures
  • Structural sections made of steel construction
  • As the finishing material by just painting
  • All kinds of coating, wall paper or backerboard of ceramics in exterior walls and indoor spaces
  • Backerboard applications in wet spaces
  • Indoor and outdoor ceiling applications
  • Suspended ceiling systems
  • Fire wall construction
  • In areas where sound insulation is required
  • In thermal insulation systems
  • As bottom sheet under roof covering materials
  • As backing material of cabinets or panels
  • On walls, parapets and ceilings of balconies and terraces
  • Soffit and fascia cladding
  • Steel column and fake column cladding
  • Construction of site fences
  • On shaft walls
tepePan®

Standard Dimensions  


Thickness  06, 08, 10, 12, 14 mm
Weight  8,1 – 10,8 – 13,5 kg/m2
Weight in medium density  16 - 18,9 kg/m2
Dimensions  1250 x 2500 mm
 1250 x 2800 mm
 1250 x 3000 mm


Technical Specifications  


Density 1450 ± 75 kg/m3
Fire resistance  A1 building material according to EN 13501-1
Bending Strength  ≥  7 N/mm2 (under wet conditions)
≥ 12 N/mm2 (in laboratory environment)
Elastic module in bending ≥ 4000 N/mm 2
 
tepePan®

Exterior Color Chart





Areas of Usage


Walls Facades Ceilings

Walls


Facades


Ceilings


Packaging
Packaging

  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be placed on top of each other neatly and the total height of pallets should not be over 3 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transport
Packaging