Cement-Bonded Particle Board

Fiber Cement Board

Through Colored Fiber Cement Board

Interior and Exterior Paints

Betopan Deck

Thermal Insulating Plaster


Homepage        Products        Betopan Painted®

Betopan Painted®

Areas of Usage
Color and Design
Packaging / Storage / Handling

Betopan Painted®

It is painted and wood textured fiber cement boards. Standart Colours (based on Tepe Colour Externa and Tepe Color Wood Colour Charts) and custom colours are available. It is possible to provide different edges such as square, shiplap

Advantages of Use

  • Pre-painted
  • Real wood textured
  • Can be applied in 4 seasons
  • It can be fixed on metal or timber sub-construction
  • Does not need regular maintenance like real wood
  • It is long lasting.
  • Easy to cut and drill
  • Easy to apply
  • Resistant to seasonal changes
  • Resistant to fire
  • Resistant to moisture and water
  • Resistant to impact
  • It is odorless and does not release toxic gas
  • Does not contain any harmful substances to health

Areas of Application

  • It is mostly used in application of lap siding and rebated siding
  • It can be fixed on metal or timber sub-construction
  • It is used in ventilated facade systems
  • It can be used on all surfaces in prefabricated and light steel structures
Betopan Painted®

Standard Dimensions  

Thickness  4,6,8,10,12,14 mm
Size 1250 x 2500 mm
1250 x 2800 mm
1250 x 3000 mm


Technical Specifications 

 Durability classification  Category A, Class 2
Density (kg/m3) 1150 ± 75 kg/m³     
Bending Strength (N/mm2) ≥ 7 N/mm2 (average 10-11 N/mm2)
Reaction to fire (EN 13501-1) A1-s1,d0
Bending Elasticity Modules (N/mm2) ≥ 4000 N/mm2
These tests above is made in according to Standard TS EN 12467+A2 / BS EN 12467:2012+A2:2018 / ASTM C1186.
Betopan Painted®

Exterior Color Chart

Wood Color Chart

TCW2002 TCW2002

TCW2003 TCW2003

TCW2008 TCW2008

TCW 2013 TCW 2013

TCW2005 TCW2005

**For further color options, please contact our technical sales team

Boundary Walls&Fences




Interior Walls



  • Our panels are transported domestically and internationally with the plate edges painted and the Tepe Betopan® emblem.
  • The panels are on wood pallets covered in plastic with rings and corner brackets added.
  • During transport the panels must be covered in canvas.
  • When the panels are being carried one by one they are recommended to be carried vertically or as close as possible to vertical so as not to be bent.
  • The panels must be stored in a closed area.
  • Whether in storage or at the assembly site the panels must be left in lateral position and should not be leaned either laterally or vertically on a wall or similar surfaces.
  • If the panel packages are to be stacked caution should be taken to align them.
  • If the panels are not going to be used for a long period the packages should be completely covered in plastic to avoid being affected from heat and humidity change (stay stable).
  • After panels are taken from the package to be used the package should be covered over again with the plastic.
  • The storage area must be closed.
  • When stacking pallets the pallet feet should be lined up one on top of the other.
  • Do not take the plastic cover off until use.
  • Do not take off the steel strips until use.
  • The materials should be placed on the smoothest ground possible.
  • When storing, pallets should be carefully placed on top of each other with 5 pallets at most  and the total height of pallets should not exceed 3,5 meters.
  • When loading, only two pallets at a time should be loaded.
  • When loading make sure that the pallets are placed on the truck in a balanced way.
  • Pallets ready for transpor